This menu section allows you to change the interface language, set the date, time, units of measure, return the device to factory default settings and perform memory card formatting.
Language selection
Date setting
Time setting
Rangefinder units of measure
When set to ON, standard video compression is applied so the video file size is reduced.
When set to OFF, minimal video compression is applied. In this case, the quality of the recorded video is better, but its size is significantly increased.
Warning! Larger video file sizes result in shorter recording times. This may lead to longer download times for video files through the Stream Vision 2 app.
Enable/disable video compression:
When this feature is enabled, the device automatically turns off after 30 minutes of inactivity in Display off mode.
This function activates the vibration indication when the device is turned on/off and when buttons are pressed.
Turn on/off the LED indicating the operation of the device.
Factory reset
The following settings will be returned to their defaults before being changed by the user:
Attention! When restoring the factory defaults the date, time and user pixel map are saved.
This function enables you to format the Flash memory card. All files will be deleted.
Formatting should be carried out in case of a memory card error.
Before formatting, make sure you transfer all footage to other media.