Ballistics

This section contains parameters for the ballistic calculator in the riflescope.

1. Enter the main menu with a long press of the MENU (3) button.
2. Rotate the controller (6) to select the submenu Ballistics .
3. Enter the submenu with a short press of the MENU (3) button.
4. Rotate the controller (6) to select the desired menu item.

Ballistics Activation

The Ballistic calculator function shows the recommended aiming point and correction values. For more information on using the function, see the section Ballistic Calculator.

1. Rotate the controller (6) to select Ballistics Activation .
2. Turn the Ballistic Calculator on/off with a short press of the MENU (3) button.

Auxiliary Indication of Distance

The "Auxiliary indication of distance" function shows an additional window with the result of measuring the distance near the reticles of the rangefinder or ballistic calculator.

1. Rotate the controller (6) to select Auxiliary indication of distance .
2. Press briefly the MENU (3) button to enter submenu.
3. Rotate the controller (6) to select the display mode: Off, Bound to reticle mark or Bound to SPOA mark.
4. Confirm selection with a brief press of the MENU (3) button.

SPOA Mark Type

1. Rotate the controller (6) to select the SPOA Mark Type menu item.
2. Press briefly the MENU (3) button to enter submenu.
3. Rotate the controller (6) to select one of the three reticle shapes for the suggested point of aiming .
4. Confirm selection with a brief press of the MENU (3) button.
5. The selected reticle will appear on the display when using the Ballistic Calculator.

Notes:

• MilLine  is a line with 1 mil grooves. It scales as the magnification changes. It is designed for shooting with aiming off for adjustment depending on wind direction: the entire line moves vertically. As for the horizontal direction, you can navigate by grooves. If the weather correction function is turned on, the cross on the line will also move to the side.

SPOA Mark Color

1. Rotate the controller (6) to select the SPOA Mark Color  menu item.
2. Press briefly the MENU (3) button to enter submenu.
3. Rotate the controller (6) to select one of color combinations for the suggested point of aiming.
4. Confirm selection with a brief press of the controller MENU (3) button.

Ballistic Calculator Units

In this item, you can change or disable the units for the ballistic calculator corrections.

1. Rotate the controller (6) to select the Ballistic Calculator Units  menu item.
2. Briefly press the MENU (3) button to enter the submenu.
3. Rotate the controller (6) to select one of the three units (MOA, MRAD, Click) or Off to disable the units.
4. Confirm your selection with a brief press of the MENU (3) button.