en
de fr es

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Digisight Ultra LRF
Manual
Digisight Ultra LRF

Table of contents

Video Recording and Photography

 

Digisight Ultra LRF riflescopes feature video recording and photography of an image, which are saved to an internal memory card.

Before using this feature, please read the Date and Time subsections of the section General Settings.

For information on how to watch recorded photos and videos, see the Stream Vision 2 user manual: Android, iOS.

The built-in recorder operates in two modes - Video and Photo.

Video mode. Video recording

  1. Switch to Video mode with a long press of REC (4) button.
  2. Start video recording with a short press of REC (4) button.
  3. Upon start of video recording icon disappears, and icon REC and recording timer in the format MM:SS (minutes : seconds) appear instead: .
  4. Pause and resume recording video with a short press of REC (4) button.
  5. Stop recording video with a long press of the REC (4) button.
  6. Video files are saved to memory card:
  • After stopping video recording.
  • Upon powering the riflescope off if recording was on.
  • When the memory card is overfilled during record (“Memory full” message appears on the display).

Photo mode. Capturing an image 

  1. Switch to Photo mode with a long press of REC (4) button.
  2. Take a picture with a short press of REC (4) button. The image freezes for 0.5 sec and a photo is saved to memory card.

Notes:

  • You can enter and operate the menu during video recording.
  • Recorded videos and photos are saved to built-in memory card in the format img_xxx.jpg (photos); video_xxx.mp4 (videos). xxx – three-digit counter for videos and photos.
  • The counter for multimedia files cannot be reset.

Attention!

  • Maximum duration of a recorded file is five minutes. After this time expires a video is recorded into a new file. The number of recorded files is limited by the capacity of unit's internal memory.
  • Сheck regularly free capacity of the internal memory, move recorded footage to other storage media to free up space on the internal memory card.
  • Graphic data (status bar, icons and other) are shown in recorded video/photo files.
  • When the Display Off function is activated, video recording is paused.