Manuals | Pulsar

Show device diagram

The feature of the function is that there is no need to constantly keep the riflescope at the point of aiming.

In the Zeroing Parameters Settings menu, press UP (7)/DOWN (5) buttons to move the cursor to the Freeze function.
Align the reticle with the point of aiming and press МENU (6) or ON/OFF (18) button. A screenshot will be taken, an icon will appear.
Go to the additional Windage/Elevation submenu and adjust the position of the reticle (see the Zeroing section).
Select the Freeze submenu item again and briefly press МENU (6) or ON/OFF (18) button - the image will “unfreeze”.