Manuals | Pulsar

To install an IR illuminator with a Weaver mount*, you will need to install a 30 mm ring with Weaver rail** on the riflescope:

Unscrew the screws (28) with the Allen key.
Install the ring (29) on the riflescope body.
Adjust the position of the Weaver rail (left/top/right) depending on the seat of the IR illuminator.
Tighten the screws (28).
Install the IR illuminator on the Weaver rail according to the installation instructions.

* Purchased separately.

** Supplied with models without an IR illuminator.