Manuals | Pulsar

Maintenance should be carried out at least twice a year and should include the following steps:

Wipe the exterior surfaces of metal and plastic parts with a cotton cloth. Do not use chemically active substances, solvents, etc. as these will damage the paint.
Clean the electrical contacts of the rechargeable battery on the device using a non-greasy organic solvent.
Check lenses of objective, eyepiece and rangefinder. If necessary, remove dust and sand from the optics (it is preferable to use a non-contact method). Cleaning of the exterior surfaces of the optics should be done with cleaners designed especially for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-term storage.

Manual

Axion 2 LRF