Manuals | Pulsar

The “freeze” function allows the user to adjust the reticle on a still image while manipulating the rifle.

In the Zeroing Parameters Settings menu, rotate the controller ring (6) to move the cursor to the Freeze function.
Align the reticle with the point of aiming and press the controller (6) or ON/OFF (13)/REC (4) button (depending on the firmware version). A screenshot will be taken, an icon will appear.
Go to the additional Windage/Elevation submenu and adjust the position of the reticle (see the How to Zero section).
Select the Freeze submenu item again and briefly press the controller (6) or ON/OFF (13)/REC (4) button (depending on the firmware version) - the image will “unfreeze”.