Manuals | Pulsar

Adjust the brightness level of the aiming reticle.

Press and hold the controller button (6) to enter the main menu.
Rotate the controller ring (6) to select the Reticle & Zeroing menu item.
Press the controller button (6) briefly to enter the Reticle & Zeroing submenu.
Rotate the controller ring (6) to select the Reticle Brightness submenu.
Press the controller button (6) briefly to enter the Reticle Brightness submenu.
Rotate the controller ring (6) to set the desired brightness level (1 to 10).
Press the controller button (6) briefly to confirm the selection.

Manual

Thermion 2 LRF XP50 Pro