en
es

Global

Deutschland

France

Italia

España

United Kingdom

United States

Lietuva

Home
Support
Manuals
Thermion 2 LRF XL
External Power Supply

Thermion 2 LRF XL
Manual
Thermion 2 LRF XL

Table of contents

External Power Supply

Power can be supplied from an external source such as a 5V or 9V power bank.

  1. Connect the external power supply to the micro USB Type-C port (10) of the riflescope.
  2. The riflescope switches to external power source, while built-in Battery Pack APS5 and removable Battery Pack APS2 (or APS3) will gradually recharge.
  3. A rechargeable battery icon  indicating a percentage of the battery life will appear in the status bar.
  4. When you turn off external power source, the riflescope switches over to the removable battery without turning off. When there is no removable battery or low power level the device switches to the built-in battery.

Warning! Charging APS2 / APS3 / internal APS5 batteries at air temperatures below 0° C (32° F) may reduce battery life. When using external power, connect the Power Bank to the device after it has been turned on and working for several minutes.

 
Previous
Switching and Changing the Batteries
Next
Mounting on the Rifle

Thermion 2 LRF XL
Manual
Thermion 2 LRF XL

×

from Yukon Group 2024