Manuals | Pulsar

Turn on the IR illuminator by pressing the button (7) on the side of the illuminator housing.
Turn the knob (8) of the IR illuminator to adjust the lighting power.
To adjust the light spot position in the riflescope field of view, loosen the ring (9) of the IR illuminator by turning it in the direction of the arrow, see Fig. 2.
Turn on the riflescope to control the position of the light spot on the display. Use the hinge system of the IR illuminator lens, to achieve the required position of the light spot in the riflescope field of view. Once well adjusted, fix the IR illuminator ring (9).
Turn off the IR illuminator by pressing the IR button.

Manual

Digex S IR illuminator