en
lt

Global

Deutschland

France

Italia

España

United Kingdom

United States

Lietuva

Home
Support
Manuals
Thermion Duo
Wi-Fi Settings

Thermion Duo
Manual
Thermion Duo

Table of contents
Wi-Fi Settings

Wi-Fi Settings

This item enables you to set up your riflescope for operation in a Wi-Fi network.

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the Wi-Fi Settings submenu.
  3. Press the controller button (6) briefly to enter the submenu
  4. Rotate the controller ring (6) to select the desired menu item.

Wi-Fi Activation

Turn on/off Wi-Fi

  1. Rotate the controller ring (6) to select the Wi-Fi Activation menu item.
  2. To turn Wi-Fi on, briefly press the controller button (6). 
  3. To turn Wi-Fi off, briefly press the controller button (6).

Password Setup

This item enables you to set a password to access the riflescope from an external device. The password is used to connect an external device (i.e. smartphone) to the riflescope.

  1. Press the controller button (6) to enter the Password Setup submenu.
  2. The unique password only for your device will appear on the image.
  3. Rotate the controller ring (6) to set the desired password. Press the controller button (6) to toggle through the digits.
  4. Press and hold the controller button (6) to save the password and exit from the submenu.

Access Level Setup

This sub-function enables you to configure the appropriate level of access to your device made available to the Stream Vision 2 application.

Owner level. A Stream Vision 2 user has full access to all the device’s functions.

Guest level. A Stream Vision 2 user can only view video footage from the device in real time.

  1. Press the controller button (6) to enter the Access Level Setup submenu.
  2. Rotate the controller ring (6) to select Owner or Guest.
  3. Confirm your selection with a short press of the controller button (6).

Wi-Fi Band

This setting helps to solve smartphone connection issues in the following cases:

  • If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz.
  • Many Wi-Fi networks cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and the smartphone.
  1. Press the controller button (6) to enter the Wi-Fi Band  submenu.
  2. Rotate the controller ring (6) to select the WiFi bandwidth – 5 GHz or 2.4 GHz.
  3. Confirm your selection with a short press of the controller button (6).
Previous
User Mode
Next
Microphone

Thermion Duo
Manual
Thermion Duo

×

from Yukon Group 2024