en
lt

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Thermion 2
Manual
Thermion 2

Table of contents

Reticle Setup

This main menu item allows you to select the reticle shape, color and brightness.

  1. Press and hold the controller button (6) to enter the main menu.
  2. Rotate the controller ring (6) to select the Reticle Setup  menu item.
  3. Press the controller button (6) briefly to enter the Reticle Setup submenu.

Reticle Type

Selection of the aiming reticle shape.

  1. Rotate the controller ring (6) to select the Reticle Type  submenu.
  2. Press the controller button (6) briefly to enter the Reticle Type submenu.
  3. Rotate the controller ring (6) to select the desired aiming reticle shape from the list that appears. The reticle type changes as the cursor goes down the reticle list.
  4. Press the controller button (6) briefly to confirm the selection.

Note: the riflescope supports scalable reticles

Reticle Color

Selection of reticle color.

  1. Rotate the controller ring (6) to select the Reticle Color  submenu.
  2. Press the controller button (6) briefly to enter the Reticle Color submenu.
  3. Rotate the controller ring (6) to select one of the color options for the reticle: Black/Red, White/Red, Black/Green, White/Green, Red, Green, Yellow, Blue, Orange, Black/White, White/Black.
  4. Press the controller button (6) briefly to confirm the selection.
 

Reticle Brightness

Adjust the brightness level of the aiming reticle.

  1. Rotate the controller ring (6) to select the Reticle Brightness  submenu.
  2. Press the controller button (6) briefly to enter the Reticle Brightness submenu.
  3. Rotate the controller ring (6) to set the desired brightness level (1 to 10).
  4. Press the controller button (6) briefly to confirm the selection.