Manuals | Pulsar

Maintenance should be carried out at least twice a year and should include the following steps:

Wipe the exterior surfaces of metal and plastic parts with a cotton cloth. Do not use chemically active substances, solvents, etc. as these will damage the paint.
Clean the electric contacts of the battery pack and battery slots on the riflescope using a non-greasy organic solvent.
Recharge the battery if necessary (50%-80% is recommended for normal use).
Check the lenses of the eyepiece and objective. If necessary, remove dust and sand from the optics (it is preferable to use a non-contact method). Cleaning of the exterior surfaces of the optics should be done with cleaners designed especially for this purpose.

Manual

Talion