en
lt

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Merger LRF
Manual
Merger LRF

Table of contents

External Power Supply

Power can be supplied from an external source such as a 5 V power bank.

  1. Connect the external power supply to the USB Type-C port (17) of the device.
  2. The device switches to external power source, while built-in Battery Pack and removable Battery Pack APS3 will gradually recharge.
  3. The display will show the battery icon  with charge level as a percentage.
  4. If the device is powered by an external power supply, but the APS3 battery is not connected, only the built-in battery will be charged.
  5. When the external power supply is disconnected, the device switches to the internal battery pack without powering off.

Warning! Charging the built-in battery and the APS3 battery from the power bank at an external temperature below 0 °C (32 °F) can reduce the battery life. When using external power, connect the Power Bank to the device after it has been turned on and working for several minutes.