Status Bar

The status bar is at the bottom of the image and shows information on the actual operating status of the device, including:

1. Colour Mode (displayed only in thermal imaging and Multispectral PiP modes):

- White hot

- Black hot

2. Image mode:

Digital mode

Thermal imaging mode

  Multispectral PiP Digital

Multispectral PiP Thermal

 Multispectral PiP Digital disabled

Multispectral PiP Thermal disabled

The image channel can be disabled in the “Viewing Channel Activation” sub-item of the General Settings section.

3. IR illuminator power level (e.g. Level 3)

4. Amplification level (e.g., Normal; displayed only in thermal imaging and Multispectral PiP modes)

5. Smoothing Filter (displayed when the function is on; displayed only in thermal imaging and Multispectral PiP modes)

6. Calibration mode (a countdown timer  will appear instead of the calibration icon when in automatic calibration mode with 5 seconds remaining until automatic calibration; displayed only in thermal imaging and Multispectral PiP modes)

7. Microphone

8. Current magnification

9. Wi-Fi connection

10. Clock

11. Power supply:

• Battery discharge level (when the device is powered by a built-in or removable battery).
• External battery power indicator (when the device is powered by an external power supply).
• Battery indicator with current percentage of charge (when charging from an external power source).