Colour Modes

Available in thermal imaging and multispectral PiP  modes

White hot is the default display mode.

To select another palette:

1. Press and hold down the МENU (9) button to enter the main menu.
2. Select the Color Modes  icon with the UP (7)/DOWN (8) buttons. 
3. Press briefly the МENU (9) button to enter submenu.
4. Select the desired palette with the UP (7)/DOWN (8) buttons.
5. Confirm your selection with a brief press of the МENU (9) button.

Note: you can also switch from a selected color palette to the White hot palette with a long press of the DOWN (8) button.

Tip: to preserve brightness and contrast values when switching palettes, activate User Mode.

• White hot - a black and white palette where black = cold; white = hot

• Black hot - a black and white palette where white = cold; black = hot
• Red Hot
• Red Monochrome
• Rainbow
• Ultramarine
• Violet
• Sepia

Attention! The device should not be used to accurately measure temperature. The images generated are based on temperature contrast rather than true temperature readings.