Battery Charging

Before using the LPS7i battery (1), remove the protective cover (9) and install the battery compartment cover* (2) on the battery (1).

Option 1. USB Charging

1. Install the LPS7i battery (1) in the battery compartment (3) of the device (4).

2. Connect the USB cable (7)  to the USB Type-C connector (5) of the device.

3. Connect the other end of the USB cable (7) to the Power Adapter (8) by removing the USB Type-A adapter.

4. Plug the Power Adapter (8) into a 100-240 V socket.

5. Wait until the battery is fully charged (indication in the status bar: ).

If the device is off, the LED indicator (5) will display the battery charge status.

Option 2. Charging the battery via USB

1. Connect the plug of the USB Type-C** cable (7) to the USB Type-C connector (6) of the battery.

2. For fast charging, connect the second end of the USB Type-C cable (7) to the Type-C connector of the power adapter** (8) by removing the Type-A adapter from the plug. When connected to a computer or a Type-A power adapter, the battery will charge at normal speed.

3. Plug the power adapter (8) into a 100-240 V socket.

4. LED (10) will display battery charge level.

Option 3. Wireless Charging

1. Remove the battery compartment cover* (2).

2. Place the battery with the sign side on the wireless charger*** (11). For more efficient wireless charging, align the lightning bolt icon on the battery with the centre of the charger platform (11).

3. Turn on the wireless charger according to its instruction manual.

4. LED (10) will display battery charge level.

* Included in the Telos device package supply.

** Purchased separately or supplied as package contents of a device.

*** Third party-purchasing. The LPS7i battery works with all QI standard wireless chargers.

Note: Charging with a USB cable is significantly faster than using a wireless charger.