Merger LRF XP35

The Merger LRF XP35 is the most compact and lightweight model of the line, it features a staggeringly wide field of view (17.8°).
This allows you to comfortably scan vast areas from greater distances with both eyes and maintain awareness of the terrain without eye fatigue.
The Merger LRF XP35 is equipped with our signature European-made Lynred sensor with NETD <25 mK.
This guarantees a superb quality, highly detailed image, even in adverse conditions.

Please make sure you have made the following adjustments:

• First, adjust the dioptre adjustment by rotating the eyepiece dioptre rings to clearly see the icons on the display and in the status bar.
• Second, adjust the lens focus to see the object of observation clearly. Please note that re-focusing may be required as the distance to the object changes.
• Do the image calibration – either in manual mode (with lens cover closed) or in automatic mode.
• Select the most suitable amplification level (“Normal”, “High”, “Ultra”) depending on the specific observation conditions.
• Go through the different colour pallets.
• Manually adjust display contrast and brightness. We recommend keeping those two values at similar levels. A huge difference between them badly affects the image quality.
• Check smoothing filter. If needed turn it on or off.

During the calibration process the image freezes on the screen – this is normal and not a defect.

Default calibration mode is “Automatic” (the software decides when calibration is necessary) but you can change it to “Manual” mode in the "Main menu" => "Calibration mode" to calibrate the riflescope when you need to base on actual image quality. Please close the lens cover prior to manual calibration. We recommend using automatic mode all the time. Please read more about calibration in the user manual for your thermal device.

You are using the manual calibration mode without closing the lens cover. Please make sure the lens cover is closed during calibration or switch to the automatic calibration mode if you do not want to close the cover.

No, a clicking sound is normal in the automatic and semiautomatic calibration modes.

You may switch to the manual calibration mode to avoid the sound. Remember to close the lens cover to make sure no ghost images appear on the display.

Calibration levels the background temperature of the microbolometer and eliminates image flaws (such as vertical stripes, ghost images of previous objects etc.). Intervals between calibrations depend on operating time: the longer a thermal imager operates nonstop, the less frequently calibration is required.

You may try repairing the pixels using the respective menu item of your thermal imager. For details, please refer to the user manual. https://www.pulsar-nv.com/glo/support/manuals/2966/merger-lrf-defective-pixel-repair/s2483/

Click here to view sample video instructions. https://www.youtube.com/watch?v=do2sLm4wVW0%20

Please take note of the following:

Accuracy of measurement and maximum range depend on the reflection ratio of the target surface, the angle at which the emitting beam falls on the target surface and environmental conditions. Reflectivity is also affected by surface texture, colour, size and the shape of the target. A shiny or brightly coloured surface is normally more reflective than a dark surface.

Measuring range to a small sized target is more difficult than to a large target. Accuracy of the measurement can also be affected by light conditions, fog, haze, rain, snow etc. Ranging performance can degrade in bright conditions or when ranging towards the sun.

When measuring range to a small-sized target located more that 400 meters away, it is recommended that you put your elbow against a solid surface. This is due to possible hand tremors and difficulty hitting the target with the beam at a longer distance.

All of our products, including Merger LRF, feature 1 Class Safety (standard IEC60825-1:2014) laser which means it's harmless to the eyes. Nevertheless, please avoid looking directly at the emitting lens of the rangefinder.

The housing of Merger LRF is made of high-quality reinforced magnesium alloy.

The Merger LRF is powered with two rechargeable batteries: one built-in with a capacity of 4 Ah, the other replaceable with a capacity of 3.2 Ah.

A single charge guarantees up to 8 hours of battery life.

Please make sure the battery is installed correctly as recommended:

Before installing the battery, make sure that there is an undamaged rubber insulating ring on the battery. The ring is designed to protect your device from moisture getting inside. Damage to the device due to a missing ring is not covered by the warranty.

Install the battery into the battery compartment that a pictogram in the form of a “dot” on the battery on the left. You will hear a click when the battery is placed correctly.

The proximity sensor is working.

The proximity sensor can be turned off in the device settings https://www.pulsar-nv.com/glo/support/manuals/2966/merger-lrf-general-settings/s2478/

When the proximity sensor is off, the display can be turned on/off by pressing the ON/OFF button.

If Merger LRF will not turn on, press and hold down the ON button for 15 sec, the scope should turn on. If this does not help, probably the battery is empty.
Charge the internal battery or connect a charged external power supply such as power bank. Contact us support@pulsar-vision.com

Please try removing and re-inserting the external battery, turn off and on the binoculars and press the menu button again.

The Merger LRF is equipped with a 1/4" tripod mount. Please follow the instructions for installing Merger on a tripod:

https://www.pulsar-nv.com/glo/support/manuals/2966/merger-lrf-installing-the-device-on-a-tripod/s2578/

You don’t need to register your device to have a warranty.

When you buy our device from an exclusive Pulsar distributor or its dealer, you receive a warranty card with it.

Warranty starts from the date of the first purchase of the device. Also please keep your payment receipt.

For all the questions regarding service of our products please contact a distributor in your country:

https://www.pulsar-nv.com/glo/where-to-buy/36

If you are from US, please contact our US distributor Sellmark

http://pulsarnv.com/#contact

There are no thermal imagers able to look through glass because glass does not let infrared radiation within 8–14 ɥm (used in thermal technology) pass: https://www.pulsar-nv.com/glo/support/faq/79/general-questions/f4/#!faq34

To switch between color modes, please proceed to the menu and select the menu item "Color modes".
Please refer to the user manual for details. https://www.pulsar-nv.com/glo/support/manuals/2966/merger-lrf-colour-modes/s2474/

1) Download the Stream Vision 2 App from Google Play or the App Store free of charge.

2) Connect your Pulsar device to your mobile device (refer to point 8 above).

3) Launch Stream Vision 2 and go to “Settings”.

4) Select your connected Pulsar device and press “Check for updates”.

Important:

If your Pulsar device is connected to your phone, please use Mobile data (GPRS / 3G / 4G / 5G) to download the update.

- If your Pulsar device is not connected to your phone but is already in the “Device” menu section, you can use WiFi to download updates.

5) Download the firmware update to the application, connect your device unless it´s connected.

6) Press “Update device” and wait for the update to download and install.

Then the Pulsar device will restart and be ready to operate.

No, restoring a previous firmware version is not possible.

We guarantee our products are free from defects in materials and workmanship for a period of three years from the date of purchase.

The warranty period for rechargeable batteries (supplied with the device or bought separately) is one year.

The warranty period for the internal battery in the Merger LRF is 3 years.
If no purchase receipt is available and the warranty card is not filled in, warranty starts from the manufacturing date plus six months. More information about the warranty is available here. https://www.pulsar-nv.com/glo/support/customer-service/warranty-service/226/

We are considering it, but no clear timeline yet.

Yes, you can connect your binoculars to a computer. Please make sure you select "Use as memory card" option once it appears on the screen, more details here:

https://www.pulsar-nv.com/glo/support/manuals/2966/merger-lrf-usb-connection/s2493/