Axion XM30S / Axion XQ38

The Axion is a purely handheld device that cannot be mounted on a riflescope. 

Please make sure you have made the following adjustments:

• First, adjust the diopter adjustment on the eyepiece to clearly see the icons on the display and in the status bar.
• Second, adjust the lens focus to see the object of observation clearly. Please note that re-focusing may be required as the distance to the object changes.
• Do the image calibration – either in manual mode (with lens cover closed) or in automatic mode.
• Select the most suitable observation mode – “Forest”, “Rocks” or “Identification” depending on the specific observation conditions.
• Go through the different color palletes.
• Manually adjust display contrast and brightness. We recommend keeping those two values at similar levels. A huge difference between them badly affects the image quality.
• Try turning Image Detail Boost ON and OFF. The greatest benefit of this feature can be enjoyed in scenery with high contrast and at shorter distances.

In the course of the calibration process the image freezes on the screen – this is normal and not a defect.

Default calibration mode is “Automatic” (the software decides when calibration is necessary) but

you can change it to “Manual” mode in the "Main menu" => "Calibration mode" to calibrate the riflescope 

when you need to based on actual image quality. Please close the lens cover prior to manual calibration. We recommend using automatic mode all the time.

Please read more about calibration in the user manual for your thermal device.

You are using the manual calibration mode without closing the lens cover.

Please make sure the lens cover is closed during calibration or switch to the automatic calibration mode if you do not want to close the cover.

No, a clicking sound is normal in the automatic and semiautomatic calibration modes.

You may switch to the manual calibration mode to avoid the sound. Remember to close the lens cover to make sure no ghost images appear on the display.

Calibration levels the background temperature of the microbolometer and eliminates image flaws

(such as vertical stripes, ghost images of previous objects etc.). Intervals between calibrations depend

on operating time: the longer a thermal imager operates nonstop, the less frequently calibration is required.

Please note that a certain amount of non-functional pixels (max 0.5% of total quantity) is allowed by the sensor and is not considered a defect. You may try repairing the pixels using the respective menu item of your thermal imager. For details, please refer to the user manual. 

Click here to view sample video instructions.

Activate the pixel repair option in the device`s menu. You will be redirected to a window with picture in picture (PiP) mode and an auxiliary cross.

Operate with navigation buttons to move the cross into the bad pixel’s coordinates. Dead pixels disappear when the auxiliary crosss is in the correct position.

Press the ON/OFF button and check for the “OK” message on the display.

Axion features an ultra compact yet feature-rich design which implies certain compromises
in terms of selected technical specifications.
We recommend that glass wearers fold back the edge of the elastic eye shade to allow a certain increase
of the field of view.
Please note that AXION features +/-5 diopter adjustment which allows using the monoculars without eye glasses thus allowing enjoyment of the entire field of view.

To switch between color palettes, please proceed to the menu and select the menu item "Color palettes".

Please refer to the user manual for details.

• Download the Stream Vision App on Google Play or App Store free of charge.

• Connect your Pulsar device to your mobile device (smartphone or tablet).
• Launch Stream Vision and go to the section “My Devices”.
• Select your Pulsar device and press “Check Updates”.

Important:

- if your Pulsar device is connected to your phone, please turn on “Mobile data transfer” (GPRS/3G/4G/5G) to download update;

- if your Pulsar device is not connected to your phone but it’s already in the “My Devices” section, you may use WiFi to download update.

• Wait for the update to download and install. The Pulsar device will reboot and will be ready to operate.

Here are the video instructions.

The battery icon in the status bar of your AXION XM30S will show charge percentage only when the display is on.
When the device is turned off, you can only see whether it's charging if you look at the LED diode (located next to the eyepiece).
Please refer to the user manual for details
https://issuu.com/yukon2/docs/user_manual_axion_xm30s

No, a rangefinder is an integral part of the AXION XQ38 LRF and cannot be removed or attached to other AXION devices.

If your power bank output current is 2A, you can use the device and charge the APS battery.
If the external battery provides only 1A, it will not charge the battery unless the device is switched off.