en
it

Deutschland

Italia

España

United Kingdom

United States

Lietuva

Proton FXQ
Manual
Proton FXQ

Table of contents

Powering on and Image Settings

  1. Remove the lens cover (1).
  2. Press the ON/OFF (6) button to turn on the attachment.
  3. If necessary, adjust the reticle sharpness according to the instructions for your scope.
  4. Enter the main menu with a long press of the controller button (8) and select the desired calibration mode: manual (M), semi-automatic (SA) or automatic (A).
  5. Calibrate the image by briefly pressing the ON/OFF (6) button. Close the lens cover before manual calibration.
  6. Select the desired observation mode (Forest, Rocks, Identification or User) in the main menu. User mode allows you to change and save user brightness and contrast settings in the quick menu.
  7. Enter the main menu with a long press of the controller button (8) and select the desired color palette (see the Color Modes section).
  8. Activate the quick menu by briefly pressing the controller button (8) to adjust the brightness and contrast of the display (see the Quick Menu Functions section).
  9. Upon completion of use turn the device off by a long press of the ON/OFF (6) button.

Warning! Never point the lens at intensive energy sources such as laser radiation emitting devices or the sun. It can damage electronic components in the device. The warranty does not cover damage arising from failure to comply with the operating rules.