Wi-Fi

This menu option allows you to set up your device for operation in a Wi-Fi network.

1. Press and hold the MENU (6) button to enter the menu.
2. Select the Wi-Fi option with the UP (5)/DOWN (7) buttons.
3. A short press of the MENU (6) button opens the menu section.

Wi-Fi Activation

Turn Wi-Fi on/off.

1. Select the Wi-Fi Activation  option with the UP (5)/DOWN (7) buttons.
2. A short press of the МENU (6) button opens the submenu.
3. To turn the Wi-Fi on or off press the UP (5)/DOWN (7) buttons.
4. Confirm your selection with a short press of the МENU (6) button.

Password Setup

This submenu allows you to set a password to access your thermal imaging attachment from a mobile device. The password is used to connect an external device (i.e. smartphone) to your device.

1. Select the Password Setup  option with the UP (5)/DOWN (7) buttons.
2. A short press of the МENU (6) button opens the submenu.
3. The unique password only for your device will appear on the image.
4. Set your desired password with the UP (5)/DOWN (7) buttons. Press the МENU (6) button to toggle the digits.
5. Press and hold down the МENU (6) button to save the password and exit the submenu.

Access Level Setup

This submenu allows you to set access levels of Stream Vision 2 application to your device.

• Access level Owner. Stream Vision user has complete access to all device's functions.
• Access level Guest. Stream Vision user has access only to real time video stream from the device.

1. Select the Access Level Setup submenu with the UP (5)/DOWN (7) buttons.
2. A short press of the MENU (6) button opens the submenu
3. Select Owner or Guest with the UP (5)/DOWN (7) buttons.
4. Confirm your selection with a short press of the MENU (6) button.

Wi-Fi Band

This setting helps to solve smartphone connection issues in the following cases:

• If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz.
• Many Wi-Fi networks cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and the smartphone.

1. Select the Wi-Fi Band  option with the UP (5)/DOWN (7) buttons.
2. Press the МENU (6) button briefly to enter the submenu.
3. Press the UP (5)/DOWN (7) buttons to select the Wi-Fi bandwidth – 5 GHz or 2.4 GHz.
4. Confirm your selection with a short press of the controller MENU (6) button.