Battery Charging

Digex night vision digital riflescopes come with a built-in rechargeable Lithium-Ion APS3 battery pack with a capacity of 3200mAh and a removable rechargeable Lithium-Ion APS2 battery pack with a capacity of 2000mAh. Batteries should be charged before using.

Charging

1. Open the micro USB cover (9) by turning it counterclockwise.
2. Connect the micro USB plug of the USB cable (16) to the micro USB port (10) in the body of the riflescope.
3. Connect the second micro USB plug of the USB cable (16) to the micro USB port on the DC adapter (17).
4. Plug the device into a 100–240 V socket (18).

Attention! When charging batteries via the micro USB port (10), the built-in APS3 Battery Pack is the first to be charged. When it is completely charged, the removable APS2 Battery Pack starts charging. When the device is in use, power consumption occurs in reverse sequence.

1. Insert the APS2** Battery Pack (8) along the rail into the APS charger (13) slot as far as it will go. The APS charger is supplied with your device.
2. Point A on the battery and point B on the charger should match.
3. Two batteries can be charged at the same time: the second slot is designed for it.
4. Connect the MicroUSB plug of the USB cable (16) to the port (14) of the charger (13).
5. Connect the second plug of the USB cable (16) to the USB port on the mains adapter (17).
6. Plug the device into a 100-240V socket (18).

The LED indicator (15) will display battery charge status:

LED Indicator***	Battery Charge Status
	Battery level is from 0% to 10%. Charger is not connected to a power supply.
	Battery level is from 0% to 10%. Charger is connected to a power supply.
	Defective battery. Do not use the battery.
	Battery level is from 10% to 20%.
	Battery level is from 20% to 60%.
	Battery level is from 60% to 95%.
	Battery completely charged. Charging will automatically stop. The battery can be disconnected from the charger.

* Supplied as part of package.

** APS3 Battery Pack is available (sold separately).

*** LED indicator displays the current battery charge status for 30 seconds when the APS charger is not plugged in. When the power is being supplied, the indicator is constantly displaying the current battery charge status, the LEDs are additionally flickering to display the battery charging process.