Rangefinder

Menu item Rangefinder contains settings for the built-in laser rangefinder.

1. Press and hold the MENU (3) button to enter the main menu.
2. Select the submenu Rangefinder  with the UP (4) / DOWN (2) buttons.
3. Press the MENU (3) button briefly to enter the submenu.

Reticle Type

1. Press the MENU (3) button briefly to enter the Reticle Type  submenu.
2. Select one of the three reticle shapes  with the UP (4) / DOWN (2) buttons. 
3. Confirm selection with a brief press of the MENU (3) button.

TPA

This feature allows you to determine the target position angle. When the function is activated the angle is constantly displayed in the upper right corner of the display.

1. Select TPA  with the UP (4) / DOWN (2) buttons.
2. Turn TPA on/off with a short press of the MENU (3) button.

THD

"THD" (True Horizontal Distance) function allows you to measure true horizontal distance to a target based on the angle of elevation value.

1. Select THD with the UP (4) / DOWN (2) buttons.
2. Turn THD on/off with a short press of the MENU (3) button
3. Hereinafter the message THD will appear above the distance readings.