Digex C50

Along with the day use, we suggest using color mode in early and late stages of twilight. As the illumination level drops, please switch to the night (b/w image) mode.  You can also use an active IR Illuminator (either supplied or an extra one).  when it gets too dark.

The Digex uses a powerful IR illuminator. This increases detection range and gives the impression of a higher illumination

when seeing objects at a shorter range. In such cases,  we recommend the following:

- reducing the power of the IR illuminator;

- adjusting the position of the IR spot ;

- holding the riflescope a little bit higher;

- using an alternative focusable IR Illuminator installed in place of the supplied IR.

Products are supplied with partially charged batteries.
For better experience, we suggest fully charging the batteries before first use.
Please read the user manual for your device for extra information.

You can use all types of 30mm compatible rings and mounts. 

There are no special recommendations – the rings should be good quality 

and sit as low as possible to facilicate zeroing.

You may also consider Innomount, this company produces mounts specially for our riflescopes:

Here is a catalog link.

When choosing rings, please take note of the dimensions of the riflescope.

Please make sure:

- your riflescope has the latest firmware version. Click here to check.

- you have correctly and firmly installed the riflescope on your rifle. 

- you have correctly carried out the zeroing procedure described in the user manual.

When setting the zeroing coordinates, the reticle moves along the image which allows a wider range of reticle adjustment.

The reticle movement range makes it possible to successfully zero a riflescope mounted even on a mount far from being ideal thus minimizing mount's faults. Higher precision of the rifle-mount system requires less movement of the reticle.

We suggest mounting the riflescope as low as possible and make sure there are no inclinations in either side, especially vertically.

Yes, you can use the riflescope both at night and in the daytime.

For better performance in the daytime please close the lens cover and use the manual display brightness and contrast settings.

The internal battery can be replaced only at the service centre. Please contact your seller or national distributor to arrange return for repair.

No, Digex C50 does not support a remote control. 

To control the riflescope remotely, you may use Stream Vision 2 App available on:

Google Play

App Store

Yes, you can use a car adapter featuring 5V/2A output. 

No, this function is not available. Please use the standard video recording function. 

After zeroing the reticle may be slightly off the centre of the field of view which is normal and does not affect accuracy. If the riflescope is installed properly on your rifle, and the mount is well fixed too, you may not need to move the reticle a lot, thus the reticle will stay very close to the centre.

Yes, user zeroing profiles are saved even if the battery is not installed in the riflescope for a long period of time.

When using digital zoom, image is cropped so resolution will become lower and the image will look not as clear as when using the base (optic magnification).
It's a peculiarity of digital zoom in all devices, and it's not a defect.

You cannot do it by yourself. However you can send us a reticle type proposal and we will have it considered.

All Pulsar digital and thermal riflescopes feature a max. shock resistance of 6000 Joules.
Please check this value for your cartridges.