Technical Maintenance

Maintenance should be carried out at least twice a year and should include the following steps:

• Wipe the exterior surfaces of metal and plastic parts with a cotton cloth. Do not use chemically active substances, solvents, etc. as these will damage the paint.

• Clean the electric contacts of the battery pack and battery slots on the riflescope using a non-greasy organic solvent.

• Recharge the battery if necessary (50%-80% is recommended for normal use).

• Check the lenses of the eyepiece and objective. If necessary, remove dust and sand from the optics (it is preferable to use a non-contact method). Cleaning of the exterior surfaces of the optics should be done with cleaners designed especially for this purpose.