General Settings

Date

Date Setting:

1. Press the MENU (3) button briefly to enter the Date  submenu. The date is displayed in dd/mm/yyyy format.
2. Rotate the controller (6) to select the desired year, month and date. Press the MENU (3) button briefly to switch between digits.
3. Press and hold the MENU (3) button to save your selected date and exit from the submenu.

Time

Time Setting:

1. Press the MENU (3) button briefly to enter the Time  submenu.
2. Rotate the controller (6) to select the time format - 24 or AM/PM.
3. Press the MENU (3) button to proceed to the hour setting.
4. Rotate the controller (6) to select the hour value.
5. Press the MENU (3) button to proceed to the minute setting.
6. Rotate the controller (6) to select the minutes value.
7. Press and hold the MENU (3) button to save your selected time and exit from the submenu.

Units of Measure

Units of measurement selection:

1. Press the MENU (3) button briefly to enter the Units of Measure submenu.
2. Rotate the controller (6) to select the unit of measurement - meters or yards, press the MENU (3) button.
3. Return to submenu will happen automatically.

Video Compression

When set to ON, standard video compression is applied so the video file size is reduced.

When set to OFF, minimal video compression is applied. In this case, the quality of the recorded video is better, but its size is significantly increased.

Warning! Larger video file size results in shorter total video recording time. This may lead to longer download times for video files through the Stream Vision 2 mobile application.

Enable/disable video compression:

1. Rotate the controller (6) to select the Video Compression  menu item.
2. To turn on video compression, briefly press the MENU (3) button.
3. To turn off video compression, briefly press the MENU (3) button.

Auto Shutdown Options

1. Rotate the controller (6) to select Auto Shutdown Options .
2. Press the MENU (3) button to enter the submenu.

If device inactive for 30 min

When this feature is enabled, the device automatically turns off after 30 minutes of inactivity Display off mode.

1. Rotate the controller (6) to select If device inactive for 30 min .
2. Press the MENU (3) button to select On for turning on the function or Off for turning it off.

If in idle position

1. Rotate the controller (6) to select If in idle position .
2. Press the MENU (3) button to enter the submenu.
3. Rotate the controller (6) to select the time period (1 min, 3 min, 5 min) upon expiry of which the riflescope will automatically shut down, or select Switch off if you wish to deactivate Auto Shutdown.
4. Confirm your selection with a short press of the MENU (3) button.

Note: If the automatic shutdown function is activated, the status bar shows an icon ​and shutdown time period as 1/3/5 min.

Side Incline

This item allows you to activate or deactivate the “sector” arrows on the sides of the display. These arrows show the direction in which your rifle scope should be rotated to eliminate incline.

There are three modes of incline:

• 5°-10° – one sector arrow;
• 10°-20° – two sector arrow;
• > 20° – three sector arrow.

A side incline of less than 5° is not displayed.

1. Rotate the controller (6) to select Side Incline .
2. Press the MENU (3) button to select On for turning on the incline indication or Off for turning it off.

Default Settings

1. Press the MENU (3) button briefly to enter the Default Settings submenu.
2. Rotate the controller (6) to select “Yes” to restore default settings or “No” to cancel the action.
3. Confirm your selection with a short press of the MENU (3) button.

• If “Yes” is selected, display will show “Do you want to restore default settings?” and “Yes” and “No” options. Select “Yes” to restore default settings.
• If “No” option is selected: the action will be aborted and you will return to the submenu.

The following settings will be returned to their defaults:

• Video Recorder Mode – Video
• Amplification Level – Normal
• Smoothing Filter – Off
• User Mode - Off
• Calibration Mode – automatic
• Interface Language – English
• Wi-Fi – off (unique password)
• Magnification – initial value (without digital zoom)
• PiP – Off
• Colour Mode – White hot
• Units of Measurement – metric
• Side Incline – Off
• Zeroing Profile – A
• Reticle selection from the riflescope’s memory – 1
• Video Compression – Off
• Wi-Fi Band – 2.4 GHz
• Ballistic calculator – On
• Ballistic calculator units – MOA
• Display dimming – Off
• Auto shutdown if device inactive for 30 min – On

Attention! After restoring default settings, the date, time and user pixel map as well as the zeroing profiles data entered by the user are saved.