Wi-Fi Settings

This item enables you to set up your device for operation in a Wi-Fi network.

1. Press and hold the MENU (4) button to enter the main menu.
2. Use the UP (5)/DOWN (3) buttons to select the Wi-Fi Settings  icon.
3. Press the MENU (4) button briefly to enter the submenu.

Password Setup

This function enables you to set a password to access the scope from an external device. The password is used to connect an external device (i.e. smartphone) to your thermal imager.

1. Press the MENU (4) button briefly to enter the Password Setup submenu.
2. The unique password only for your device will appear on the image.
3. Use the UP (5)/DOWN (3) buttons to set the desired password using the UP (5) button to increase and the DOWN (3) button to decrease the values.
4. Press the MENU (4) button to toggle between the digits.
5. Press and hold the MENU (4) button to save your password and exit the submenu.

Access Level Setup

This option allows you to configure the appropriate access level to your device made available to the Stream Vision 2 application.

• Owner level.  A Stream Vision 2 user has full access to all device functions.
• Guest level. A Stream Vision 2 user only has access to the real time video stream from the device.

1. Press briefly the MENU (4) button to enter the Access Level Setup  submenu.
2. Select the access level with the UP (5)/DOWN (3) buttons.
3. Press and hold the MENU (4) to confirm your selection and exit from the submenu.

Wi-Fi Band

This setting helps to solve smartphone connection issues in the following cases:

• If your smartphone does not support 5 GHz Wi-Fi band, switch to 2.4 GHz.
• Many Wi-Fi networks cause interference. In this case, switching between Wi-Fi bands can improve the connection between the device and the smartphone.

1. Press briefly the MENU (4) button to enter the Wi-Fi Band  submenu.
2. Press the UP (5)/DOWN (3) buttons to select the WiFi bandwidth – 5 GHz or 2.4 GHz.
3. Confirm your selection with a short press of the controller MENU (4) button.