Manuals | Pulsar

The device has a function enabling wireless communication with external devices (smartphone or tablet) via Wi-Fi.

Turn on the wireless module in the WI-Fi Activation menu option (see the Wi-Fi section).

Wi-Fi is displayed in the status bar as follows:

Connection Status	Indication on the status bar
Wi-Fi is switched off
Wi-Fi connection is in progress
Wi-Fi is switched on, no connection with device
Wi-Fi is switched on, device connected

The device is recognized by an external device as KRYPTON2_XXXX where XXXX are the four last digits of the serial number.
After entering the password on the external device (see the Password Setup subsection of the Wi-Fi section for more information on setting a password) and setting up a connection, the icon in the status bar changes to .
The Wi-Fi function will turn off automatically if there is not enough battery power for Wi-Fi. The battery icon will turn red and flash. To use the Wi-Fi function again, you need to charge the battery.